Copyright 2006 Lubright Solutions Sdn Bhd , All Rights Reserved. For enquiries, Please contact: lubright@streamyx.com or sales@lubrightsolutions.com or Tel : 603-8062 3180/ 82 & Fax : 603-8062 3633 |
||||||||||
10. LUBRICATING GREASES |
||||||
a. |
Automotive |
|||||
i. |
Wheel bearing |
|||||
Duralube EP-2 Alpha 2000 |
||||||
ii. |
Chassis |
|||||
Chemlith Moly/Poly Chassis (OEM Specification) |
||||||
iii. |
Ball Joints |
|||||
Chemlith BJC-M2 (OEM Specifications) |
||||||
iv. |
Constatn Velocity Joint |
|||||
Chemplus 1SS- Polyurea (OEM Specifications) Chemlith 2008J- Lithium w/Moly (OEM Specifications) |
||||||
v. |
Hinge & Hardware |
|||||
CT Plex 781 |
||||||
vi. |
Seat Track Grease |
|||||
CT Plex 781 Chemlith EP-2-W |
||||||
vii. |
Brake Calipers |
|||||
Synthetic Brake Caliper Grease |
||||||
b. |
Industrial |
|||||
i. |
Electric Motor Bearing |
|||||
Chemplus 2-SS: dielectric thickener for excellent lubricating electric motor bearings. Excellent characteristic of oxidation and corrosion resistance, resists water washout, passing Bleed- SSG Cone Test, 6 hrs. @ 100°C makes it suitable for automotive wheel bearings, steering gears, and CV joints. Chemplus 2-R: non-soap polyurea lubricating grease. This product is formulated with the highest quality virgin paraffinic base oils available. Fortified with corrosion and oxidation inhibitors, this product is an excellent choice for lubrication and protection of high speed electric motor bearings as well as other applications which do not require extreme pressureadditives. |
||||||
ii. |
High Temperature |
|||||
Bentone Moly 3: Non-soap grease with no dropping point for extreme high temperature, 460cSt base oil for heavy load carrying ability at high temperature, fortified with 3% of Molybdenum Disulfide for dry lubrication. HV LC EP-2 HT: Lithium Complex equipped with EP additives for load and special polymer to maintain a high viscosity index at high temperature. Cost effective grease for elevated temperature applications. Chemplus 2 ELG HVY: Inorganic thickener for resistance against water washout, it comes with 400-450cSt base oil for load carrying ability. Extended Life Grease Chemtemp SHT 2: is a non-melt, extreme high temperature lubricating grease formulated with high quality synthetic ester & mineral oil (460cSt), fortified with special polymer and proprietary solid lubricant, all in an inorganic thickener system. CHEMTEMP SHT-2 non-melt thickener prevents “bleeding” or “dropping off” of grease commonly encounter in high temperature applications. CHEMTEMP SHT-2 adheres to metal surface even at extreme high temperature. Chemptemp SHT MY2: Additional 5% MoS2 for extra dry lubrication. Syntemp 1000 TF: Non-soap grease with no dropping point for extreme temperature with 1000SUS base oil for very heavy load. Syntemp 1000 HTC: Non-soap grease with no dropping point for extreme temperature with 1000SUS base oil for very heavy load. Syntemp 1000 HTC provides superior thermal conductivity due to the incorporation of specially selected metallic compounds. This grease is recommended where thermal transfer, thermal conductivity, or a high dielectric constant is necessary. CSC 174 MGD: Advance CSC thickener with 400cSt base oil for high temperature and corrosive environment. Environmentally friendly with no heavy metals. Working temperature up to 230oC. CSC 980 Tan:Synthetic super high-load, high-temperature, high-speed, water resistance & corrosion resistance, long-life grease formulated with advance CSC thickener for industrial crusher bearings, conveyer roller bearings, hot blower fan bearings, water pump bearings and marine machineries applications. It has good low temperature properties as well as high temperature performance, making it a multitude grease for today's demanding requirement. |
||||||
iii. |
High Speed Bearings |
|||||
Chemplus 2 R Chemspeed Synth 2: Extrme high speed grease formulated with Barium thickener with synthetic base oil in a smooth ivory texture for speed factor up to one million. Chemspeed Synthetic 2NM: Dielectric thickener grease with fully synthetic base oil for speed factor up to one million. |
||||||
iv. |
Pillow Block Bearings |
|||||
Alpha 2000 |
||||||
v. |
Conveyer Washers |
|||||
Alpha 2000 |
||||||
Vi. |
Conveyor paint Ovens |
|||||
Alpha 2000-HD |
||||||
vii. |
Machine Tool Spindles |
|||||
Alpha 2000 HD |
||||||
viii . |
Fan Motor Bearings |
|||||
. |
Chemplus 2-SS Chemplus 2-R |
|||||
ix. |
General Purposes |
|||||
Chemlith EP-2-A Alpha 2000 |
||||||
x. |
Industrial Forklift and Transportation |
|||||
Alpha 2000 Duralube EP-2 |
||||||
xi. |
Food Grade |
|||||
FMG Futura #2: is a non-soap lubricating grease formulated with the highest quality USDA H-1 authorized raw materials available. This grease has no dropping point, therefore, it is particularly useful in high temperature applications. The base fluid has a very low pour point which produces excellent low temperature properties. Chemical and physical properties of FMG Futura #2 are described below. FMG-2 Extra: is a USDA H-1 authorized aluminum complex thickened lubricating grease. It is formulated specifically for the food packaging and processing industry. FMG-2 EXTRA provides excellent extreme pressure and anti-wear protection and can be used over a wide range of operating temperatures. Synthetic FMG 2 Alpha FG 2-100 FMG Clear 00 P: is an Aluminum complex thickened lubricating grease with light amber, translucent colour. It is formulated specifically for the food packaging and processing industry. FMG Clear 00 P provides excellent corrosion protection and has excellent water resistance. |
||||||
c. |
Marine Greases |
|||||
i. |
Trailer Wheel Bearings |
|||||
Alpha 2000 Duralube Special w/ Teflon: All-purpose maintenance grease fortified with Teflon for non-stick protection for bearings. |
||||||
ii. |
Prop Spline Grease |
|||||
Alpha 2000 |
||||||
iii. |
Steering Linkage |
|||||
Alpha 2000 |
||||||
iv. |
All Purpose Marine |
|||||
Alpha 2000 |
||||||
v. |
U-Joint and Gimbal Bearing Lubricant |
|||||
Duralube EP-2 |
||||||
d. |
Steel Mills |
|||||
i. |
General Maintenance |
|||||
Economy |
||||||
Chemlith EP-2-A LC EP-2 RT: Lithium Complex with heavy base oil (410-470) for load carrying. HD LC EP-2 MT: Lithium Complex with heavy base oil (410-470cSt) for load carrying, also comes with extreme pressure additives, special polymer for tackyness and 3% Molybdenum Disulfide for dry lubrication. |
||||||
High Performance |
||||||
Alpha 2000: high-load, high-temperature, low- speed, water resistance and corrosion resistance grease formulated with advance CSC thickener with 220cSt base oil for steel mills, paper mills, off-road machineries,and marine machineries applications. Alpha 2000-HD: Super high-load, high-temperature, low- speed, water resistance and corrosion resistance grease formulated with advance CSC thickener with 460cSt base oil for steel mills, paper mills, off-road machineries, high pressure plastic injection toggle arms and marine machineries applications. It has working temperature up to 177oC, Load Wear Index of 65kgs, weld load of 500kgs, 0.39mm for Scar Test, no softening after 100,000 strokes of work test, even with 50% of water. Excellent oxidation resistance (drops by 2psi after 500hours, 9psi after 10000hours!) and corrosion resistance. It has good mobility, passed GM-9075-D, will not harden or clog distribution block. CSC 980 Tan: Synthetic super high load, high temperature, high speed, long-life, water resistance grease formulated with CSC thickener and PAO base oil. |
||||||
Low Temperature |
||||||
Chemlith LT-125 |
||||||
High Temperature Applications |
||||||
Alpha 2000-HD or Alpha 2000-HD 3% Moly: CSC thickener grease that able to retain its consistency after cyclic cooling down to room temperature. Chemtemp SHT 2 or Chemtemp SHT MY2: Non-melt semi-synthetic grease with Esther oil and 460 mineral oil for superior feature of heavy load carrying and long-life at high temperature. Syntemp 1000 TF: Non-melt grease with no dropping point and would not bleed. It comes with 1000cSt base oil further fortified with Teflon for none-seizure under extreme heat and load. CSC 980 Tan or CSC 980 Tan with Moly: CSC thickener grease with synthetic PAO that suitable for low and extreme hot applications. |
||||||
ii. |
Hot Mills/ Cold Mill-work Roll Bearings |
|||||
Sealed Bearings |
||||||
Duralube SAC-2 |
||||||
Non Sealed- Heavy Water, High Heat |
||||||
Alpha 2000-HD Lithplex EP-2-SMS Calplex HDMZ |
||||||
iii. |
Couplings |
|||||
Spindle type |
||||||
Torque Lube EPM-1 Spindle Lube OBCS 3M |
||||||
Grid and Spar Type |
||||||
Torque Lube HV1-MG (Moly/Graphite) Torque Lube HV1 |
||||||
iv. |
Caster |
|||||
Alpha 2000 Chemplus 2 ELG HVY |
||||||
v. |
Electric Motors Bearings |
|||||
Chemplus 2 R Chemplus 2SS Chemplus SYN 2-R Chemlith EMB-2 |
||||||
vi. |
Mobile Equipment |
|||||
Alpha 2000 Chemlith EP-2-MY |
||||||
e. |
Mining and Construction Equipment |
|||||
i. |
General Purposes |
|||||
Chemlith EP-2-A Alpha 2000 Alpha 2000 w/moly |
||||||
ii. |
Heavy Duty Equipment-Centralized Lubrication |
|||||
Alpha 2000 Alpha 2000 HD 1 Alpha 2000 HD 1 w/moly CSC174MGD |
||||||
iii. |
Hammer & Chisel Equipment |
|||||
Hammer & Chisel Paste Heavy Duty Hammer Paste |
||||||
f |
Agriculture |
|||||
i. |
Cotton Picker Grease |
|||||
CT Cotton Picker Grease |
||||||
ii. |
Ag Equipment All Purpose |
|||||
Alpha 2000 |
||||||
iii. |
harvester-Corn head |
|||||
CT Corn Head Grease |
||||||
g. |
Truck and Transportation |
|||||
i. |
Fifth Wheel |
|||||
Slick Pac Bag |
||||||
ii. |
Universal Joints |
|||||
Alpha 2000 Duralith EP-2 |
||||||
iii |
Springs |
|||||
iv. |
Trailer Wheel Hubs |
|||||
Alpha 2000-00 |
||||||
v. |
Water Pump Bearing |
|||||
CSC 980 Tan |
||||||
vi. |
All purposes |
|||||
Alpha 2000 |
||||||
h. |
General Purpose |
|||||
i. |
Inside/ Moderate Temperatures/ Economy |
|||||
Chemlith EP-2-A |
||||||
ii. |
Higher Temperatures/Corrosive Environment/Premium |
|||||
Alpha 2000 CSC 980 TAN Supermil HT 2 AR-460: A synthetic grease with PTFE thickener and PFPE base fluid for long-term lubrication of rolling and plain bearings, subject to high loads (weld load of 700kgs!) and high temperatures, with high oxidation resistance and corrosion protection. Supermil HT 2 AR-460 can be used for temperatures from -25 to 280oC. Speed factor is 300,000. The evaporation rate is low and ensures longer service life and re-lubrication intervals. Supermil HT 2 AR-460 is resistant to chemicals and aggressive media like acids and alkaline solutions. Supermil HT 2 AR-460 is neutral to most seals and gaskets and can also be used for the lubrication of contacts in high-voltage switches due to the excellent electrical resistance. Supermil HT 2 AR-460 is aslo designed for lubricating valves in natural gas services. It is free of sodium nitrite. |
||||||
i. |
Low Noise Grease |
|||||
Chemlith 2-LN: is suitable for bearings in electric motors, power tools, household appliances, office equipment, fans and air conditioners. Chemplus ASTE |
||||||
j. |
Electronic |
|||||
i. |
Dielectric |
|||||
SLC 250: is a viscous, non-toxic lubricant compound designed for many industrial, automotive and commercial applications. This product is thickened with an inert amorphous silica which provides non-melting properties. SLC-250 is formulated with polydimethyl silicone base fluids which provides natural resistance to oxidation, high water resistance, excellent dielectric properties with very low odor and will not dry out in service. Other features include resistance to a wide range of chemicals, provides superior lubrication of rubber and allows for excellent release and sealing properties |
||||||
k. |
Railroad |
|||||
i. |
Traction Motor Grease |
|||||
Chemlith TM: a lithium based lubricating grease formulated with highest quality base oils and fortified with rust and oxidation inhibitors, and extreme pressure additives. It has been designed specially for locomotive traction motor gear cases. Chemkote STML |
||||||
ii. |
Curve Rail Grease |
|||||
l. |
Open Gear Lubricants |
|||||
Open Gear Non-Solvent |
||||||
i. ii. iii. |
Chemlith TM Open Gear Lube EP ISO Open Gear Lube MO 140: for forge shops. |
|||||
m. |
Wire Rope and Cable Lubricants |
|||||
Chain and Cable Lubricant (aerosol) WRL 2000B: is a high viscosity, high temperature, wire rope-cable lubricant which provides excellent protection against corrosion and wear. This product protects against water wash-out and provides long lasting corrosion protection in the most harsh environments. In addition, WRL-2000B will protects against wear and abrasion. WRL- 2000B has excellent adhesion to metal surfaces and is formulated for application in centralized lubrication equipment. Due to its high dropping point, WRL-2000B continues to protect in high temperatures and will not soften and run-out. This product seals out contaminants as it lubricates and provides long term protection. |
||||||
n. |
Anti-seize Compound |
|||||
i. |
Copper Based |
|||||
CT High Temp Anti Seize CT C30A: is a premium anti-seize compound formulated for protection against corrosion, rust and seizure in a variety of environments and applications. This product contains copper and other components to protect in temperatures up to 982oC. CT C30A resists water spray- off as well as other alkaline or acidic solutions. For use on various hard metals including magnesium, stainless steel and titanium. |
||||||
ii. |
Nickel Based |
|||||
Chemtemp 1-NG: a premium nickel base, high temperature, extreme pressure anti-seize compound. For use where copper based products are not allowed, Chemtemp 1-NG contains nickel, graphite and other special additive components. Corrosion inhibitors are incorporated for protection in environments where caustic and acidic solutions are present. Also, Chemtemp 1-NG is resistant to water washout providing excellent adhesion and coverage properties. In addition, protection in temperatures as high as 1482oC is maintained with this product. |
||||||
iii. |
Graphite Based |
|||||
High Temp G Paste Chemtemp 40 |
||||||
Iv. |
Assembly Paste |
|||||
CT Assembly Paste |
||||||
o. |
Chain and Conveyor Oils |
|||||
i. |
Synthetic |
|||||
CT SYN Chain Lube 220 and 320: is a unique blend of synthetic esters to provide lubrication to allow free movement of chain components and prevent wear on the chain and sprockets. The Syn Chain Lube 220/ 320 will not build-up or leave a sticky, gummy residue to make it difficult for new lubricant to enter between the rubbing surfaces of the chain. The use of Syn Chain Lube will result in lower power consumption and reduced risk of chain breakage. The Syn Chain Lube ISO 220/ 320 is recommended to be used where temperatures do not exceed 273.9 oC. |
||||||