![]() |
|
||||||||||
Copyright 2006 Lubright Solutions Sdn Bhd , All Rights Reserved. For enquiries, Please contact: lubright@streamyx.com or sales@lubrightsolutions.com or Tel : 603-8062 3180/ 3182 & Fax : 603-8062 3633 |
9. DRAWING FLUIDS |
||||||
a. |
Water Dilutable |
|||||
i. |
Soluble Oils |
|||||
1. 2. 3. 4. |
CT 3300-FE: for aluminum, brass and copper operations, in both drawing and tube bending. CT 3363 (straight)-high chlorine, emulsifiers aid cleaning. Soluble oil that contains 33% chlorine. Used at a 4:1 dilution to stamp automotive transmission clutch bands. CT 3362-B: Non-chlorinated version of CT 3363. CT 3363-RP CT 250 |
|||||
ii. |
Synthetics |
|||||
1. 2. 3. |
CT 3417 Lubridraw 3477 CT 118 (stainless steel fins) |
|||||
b. |
Straight Oils |
|||||
i. ii. iii. iv. v. vi. |
CT 3337 CT 3337-LL CT 3337-TC CT 3359: A non-pigmented, chlorinated straight oil for stamping and deep drawing of ferrous metal, particularly steel. CT 3359 is a blend of mineral and fatty oils with a 17% chlorine EP package. It is used for drawing automotive clutch plates and torque converters. CT 3359 has a viscosity of 800 SUS and is cleanable in any standard cleaning system. CT 3340 Chemdraw 3213-M |
|||||
c. |
Synthetics |
|||||
i. ii. |
CT 3417: Synthetic, chlorinated product that can be used neat or diluter up to 20:1. This product can be used in light to medium drawing operations on both ferrous and non-ferrous metals. Applications include roll forming and drawing of oil filter cans. This product can be welded through without prior cleaning. Easily cleaned at room temperature with mild aqueous cleaner. LUBRIDRAW 3477: High performance high lubricitysynthetic polymer, chlorine free chemistry. Perfect for replacing mid to high level chlorinated soluble oil and straight oil drawing fluids. It will make deep draws such mower decks at ratios below 1:1. It can be easily cleaned and welded over with generating smoke. |
|||||
STAMPING FLUIDS |
||||||
a. |
Straight Oil |
|||||
i. ii. iii. iv. |
CT 3359 CT 3337 TC CT 3340 Chemdraw 3213-M (Blanking and piercing steel) |
|||||
b. |
Soluble Oils |
|||||
i. ii. iii. iv. v. |
CT 3000 FE CT 3363-RP CT 3362B CT 250 Lubridraw 1144 |
|||||
c. |
Synthethics |
|||||
i. ii. |
CT 3417 Lubridraw 3477 |
|||||
Vanishing Oils |
||||||
i. ii. |
CT 3425: Transparent vanishing oil used to draw light gauge aluminum, steel, cooper, brass and galvanized steel, other plastic coated parts and painted parts. Use as received, the flash point is 120oF. CT 3425 consists of two phases (1) a solvent carrier and (2) a light lubricating oil (2.5% Canola). Cleaning is eliminated when solvent carrier evaporates. Used for stamping electric motor laminations and other applications to eliminate cleaning after the operations. Product may be welded through. CT 3430: 5% Canola, designed for light gauge aluminum, steel, copper, brass, galvanized steels, also, plastic coated parts and painted parts. It will evaporate in less time than CT 3425. |
|||||